Saravana Traders

• Dimensions: 45mm x 45mm (outer dimensions). 
• Slots: Features T-shaped slots on all four sides, typically 10mm wide. 
• Material: Made from aluminum alloy, often AI Mg Si EN AW-6060, which is known for its strength and machinability. 
• Color & Finish: Typically available in a natural, silver-grey color with a protective anodized layer (e.g., 15 μm). 
• Length: Can be purchased in various lengths, including custom-cut sizes. 
• Weight: A 45x45 mm profile (mass) is approximately 1.63 kg/m. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions:30mm x 30mm cross-section.
• Material:Typically Al6060-T5 aluminum alloy, providing a good balance of strength and weight.
• Surface Treatment:Anodized finish (e.g., 15μm) for enhanced corrosion resistance and aesthetics.
• Slots:Four T-shaped slots, typically 8mm wide, for connecting with compatible accessories.
• Weight:Approximately 0.80 kg/m (weight can vary slightly based on the specific alloy and manufacturing process).
• Maximum Length:Available in standard lengths up to 6050mm, or can be custom cut.
• Compatibility:Designed for use with a wide range of connectors, hinges, and other accessories.
• Applications:Widely used in machine building, framing, prototyping, and other applications where a lightweight, strong, and versatile structural component is needed

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 30mm x 60mm (width x height). 
• Shape: Rectangular with slots along the length. 
• Material: Typically made from aluminum alloy (e.g., Al Mg Si EN AW-6060). 
• Temper: Often in T5 condition, indicating a heat treatment for enhanced strength. 
• Surface Treatment: Commonly anodized for corrosion resistance and a specific finish (e.g., silver-grey). 
• Slots: Features slots (e.g., 8mm wide) for connecting components and accessories. 
• Applications: Used in modular framing systems for building structures, workstations, automation equipment, and more. 
• Typical Uses: Construction, industry, furniture, and electronics. 
• Benefits: Good strength-to-weight ratio, corrosion resistance, and compatibility with various accessories for easy assembly. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 50mm x 50mm (square cross-section). 
• Material: Typically made from aluminum alloys. 
• Manufacturing: Produced by the extrusion process. 
• Applications: Used in various structures, machine frames, and industrial applications. 
• Variations: Can be found with different slot configurations (e.g., T-slots) for connecting components. 
• Weight: Weight per meter can vary based on the alloy and wall thickness, but a 2mm thick profile might weigh around 2.637 kg/m. 
• Common Features: Often used in modular structures due to their flexibility and ease of connection. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Material:Aluminum profiles are typically made from aluminum alloys, with 6063-T5 being a common choice due to its good extrudability and corrosion resistance. 
• Dimensions:Profiles come in various sizes, such as 20x20mm, 30x30mm, 40x40mm, and larger ones like 40x80mm, 80x80mm, and 80x160mm. 
• Shape:Profiles can be rectangular tubes, flat bars, or have specialized shapes for specific applications. 
• Length:Standard lengths for profiles are often 5.8 meters, but custom lengths are also available. 
• Weight:Weight varies depending on the dimensions and wall thickness of the profile. 
• Finish:Anodizing is a common surface treatment that provides corrosion resistance and a desired finish, such as satin anodized. 
• Straightness and Flatness:These are important for ensuring proper alignment and assembly. 
• Grooves and Holes:These features are often incorporated for mounting and connecting components. 
• Material Properties:Consider strength, corrosion resistance, and other properties relevant to the intended application

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions:The profile is 30mm wide and 30mm high, forming a square cross-section. 
• Radius:The "R" indicates a rounded or radiused corner, often on the exterior of the profile. The specific radius size (e.g., 2.5mm or 8mm) can vary. 
• Slots:Many 30x30 R profiles include T-slots or grooves on one or more sides for connecting other elements. These slots are typically 8mm wide. 
• Material:The profile is typically made from aluminum alloy, often 6063-T5 or similar, which provides a good balance of strength, corrosion resistance, and weight. 
• Finish:The aluminum is often anodized, which enhances its appearance and provides additional corrosion protection. 
• Applications:These profiles are commonly used in industrial automation, machine building, and other applications where modular construction and flexible design are needed. 
• Customization:Some manufacturers offer options for cutting, machining, and other customizations to meet specific project requirements. 

Additional Information:

• Delivery Time: with iin one day
• Packaging Details: as per customer requirements

• Dimensions: 40mm x 40mm square profile.
• Radius: At least one side has a radius, often 40mm, providing a rounded edge.
• T-slots: Frequently includes 10mm T-slots for attaching accessories.
• Material: Typically made from aluminum alloy, like AI Mg Si EN AW-6060, offering a good strength-to-weight ratio and corrosion resistance.
• Finish: Often anodized in a natural silver-grey color.
• Application: Used in construction, furniture, machine guards, display units, and various industrial applications where rounded edges are desired for safety or aesthetic appeal. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 45mm x 45mm (square cross-section). 
• Radius (R): Refers to the curvature of the rounded corners. The specific radius value (e.g., R6.25, R8.25) may vary depending on the manufacturer and design 
• Material: Typically made of aluminum alloy (e.g., Al Mg Si 6060). 
• Finish: Often anodized with a 15 μm layer for corrosion resistance and aesthetic appeal. 
• Slots: May include T-slots (e.g., 10mm) for mounting and assembly purposes. 
• Applications: Used in various industries for building structures, machine frames, and other applications where a combination of strength, aesthetics, and ease of assembly is desired. 
• Benefits:
  • Improved aesthetics compared to sharp-edged profiles. 
  • Reduced stress concentrations at the corners. 
  • Increased safety by minimizing sharp edges. 
  • Flexibility in design and construction. 
  • Compatibility with various connection and mounting systems. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 40mm x 80mm rectangular cross-section. 
• Material: Commonly made from aluminum alloys like AI Mg Si EN AW-6060 or EN AW-6063 T66. 
• Surface: Often anodized for corrosion resistance and aesthetics. 
• Slots: Features slots (e.g., 8mm or 10mm) for connecting with other components. 
• Holes: May include holes (e.g., 7.4mm) for machining threads (e.g., M8). 
• Strength: Offers a good strength-to-weight ratio. 
• Versatility: Used in various applications, including machine building, automation, and construction. 
• Modular: Designed to be used with a range of compatible accessories for easy assembly. 
• Customization: Can be cut to specific lengths and may be available in different design variants (e.g., light, economy). 
• Standards: May comply with standards like 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 45mm x 90mm rectangular cross-section. 
• Material: Typically made from aluminum alloy, often EN AW-6060 (AI Mg Si) or 6063 T66, known for its strength and machinability. 
• Finish: Commonly anodized for corrosion resistance and aesthetic appeal. 
• Slots/Grooves: Features T-slots (T-shaped grooves) or V-slots (V-shaped grooves) for connecting components or for linear motion systems. 
• Available Lengths: Typically available in standard lengths (e.g., 6050mm or 6000mm) and can be custom cut to specific lengths. 
• Applications: Used in framing, construction, automation, machine building, and various other applications. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Modular Design:These profiles are designed for modular construction, meaning they can be easily joined and combined with other components to create various structures. 
• Grooves:They feature open grooves (typically 8mm or 10mm) that allow for the insertion of various accessories like hammer head screws, nuts, and other fasteners. 
• Material:Commonly made from aluminum alloy EN AW-6060, offering a good balance of strength and lightweight properties, according to the Tuli shop. 
• Surface Finish:Anodized surface treatment is common, providing a scratch-resistant and aesthetically pleasing finish. 
• Applications:Widely used in machine building, automation, and various other industrial applications where a strong and versatile framing system is needed. 
• Variations:Available in standard, light, and economy (E) versions, with the light versions having reduced weight due to internal cavities

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions:40mm x 40mm (width x height). 
• Shape:Square, with two closed sides and potentially open slots on the other two sides. 
• Material:Typically made from aluminum alloy, such as 6063 or 6060, known for their good strength-to-weight ratio and corrosion resistance. 
• Surface Treatment:Often anodized to provide a protective layer and enhance appearance, with finishes like natural anodized or matte silver. 
• Slot Width:If slots are present, they can vary in width (e.g., 10mm) and can be T-shaped or other configurations. 
• Weight:Varies based on the specific alloy and wall thickness, but a common weight is around 1.2-1.3 kg per meter. 
• Length:Available in standard lengths (e.g., 3m, 6m) or can be custom cut to specific lengths. 
• Applications:Machine enclosures, automation equipment frames, modular framing, display units, and general structural support. 
• Features:Two closed sides offer enhanced structural rigidity, protection against dust and debris, and a clean aesthetic. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions:The profile is 45mm by 45mm in cross-section. 
• Closed Sides:Two opposite sides of the profile are solid and closed, while the other two sides are open. 
• T-Slots:The open sides feature 10mm wide T-slots, which are designed to accommodate T-nuts and other compatible fasteners for joining and mounting. 
• Material:The profile is typically made from aluminum alloy 6063 T5, known for its good strength, corrosion resistance, and ease of machining. 
• Surface Finish:The profile is usually anodized, providing a protective layer against corrosion and giving it a durable, aesthetically pleasing finish. 

Additional Information:

• Delivery Time: with in one day
• Packaging Details: as per customer requirements

• Dimensions: 20mm x 20mm (square). 
• Material: Typically made from aluminum alloy 6063-T5. 
• Finish: Often anodized for corrosion resistance and a silver color. 
• Slots: May feature T-slots (e.g., 6mm T-slot) for easy assembly and attachment of accessories. 
• Weight: Lightweight, with an estimated weight of 0.432 kg/m according to stavian metal. 
• Applications: Used in building frames, supports, enclosures, automation machinery, 3D printers, CNC machines, and more. 

• 20mm x 40mm: This defines the width and height of the rectangular profile.
• European Standard: Many 20x40 profiles adhere to European standards, ensuring consistent dimensions and quality,
• Structural Thickness: Typically, the structural cross-section thickness is a minimum of 1.5mm